Propspeed Application Guide

Plan Ahead for Success

  • Preparation is Everything: Ensure all tools, materials, and safety equipment are ready before starting. Thoroughly understand the application process, and verify environmental conditions.
  • Product Calculation Made Easy: Use the Propspeed Coverage Calculator™ to estimate the amount of product you’ll need, ensuring efficiency and avoiding waste.
  • Checklist for Consumables and PPE:
    • Paper paint suits, gloves, and eye protection.
    • Sanding equipment and cleaning materials.
    • Propspeed Application Kit for seamless application.

Timing and Environment Matter

  • Ideal Conditions: Apply Propspeed in temperatures between 16°C/60°F and 32°C/90°F, with humidity below 85%. Surfaces must remain dry during the process.
  • Drying Times: Adhere to specific drying times based on temperature, as outlined in the Propspeed guide. Don’t rush—quality takes time.

Step-by-Step Process for Superior Coating

  1. Metal Preparation:

    • Remove old coatings completely using Stripspeed or sanding.
    • Achieve an 80-grit profile for a strong mechanical bond.
    • Clean surfaces with Propclean and condition with Propprep.

  2. Coating Application:

    • Mix Etching Primer thoroughly before adding the hardener.
    • Apply two generous coats, observing strict recoat timings.
    • Apply the Clear Coat immediately after the primer dries to touch, ensuring a smooth, even finish.

  3. Final Inspection:

    • Check for sags, drips, or missed areas. Touch up as needed within 10 minutes of application.

The Importance of Patience

Good things take time. Propspeed requires at least 8 hours to dry before launching (longer in colder conditions). If weather conditions are not ideal, wait. A rushed job leads to subpar results, while careful preparation and application yield a coating that performs and lasts.

Your Propspeed application starts with preparation. Take the time to do it right, and enjoy the benefits of a superior, long-lasting finish.