Stripspeed 5 Litres
Stripspeed 5 Litres
AVOID THE GRIND, USE STRIPSPEED™
Remove Propspeed and foul-release coatings hassle free
Developed to help Propspeed applicators to prepare metal surfaces for reapplication, Stripspeed removes foul-release coatings in 30* minutes or less. The thick consistency easily hangs on vertical and overhead surfaces, making it easy to use and there is no mixing required. Just shake, pour and go. Stripspeed is non-flammable, non-caustic, DCM and NMP free. Unlike grinding or using abrasives, Stripspeed doesn't cause mechanical wear through multiple refits, and doesn't create toxic dusts or debris, increasing the lifetime of the metal.
Save time and money on Propspeed applications with Stripspeed!
*Timing is subject to atmospheric conditions. Ideal temperature is 15-27°C (60-80°F)
STRIPSPEED WORKS ON ALL HARD TO REACH SPOTS
THE EASIEST AND SAFEST COATING REMOVER
EASY TO USE
Easy to apply, easy to remove. Scrape and then scrub with an abrasive pad.
STRIPS SWIFTLY
Stripspeed works within 30 minutes or less, speeding up the Propspeed removal process.
APPLY AT ANY ANGLE
Stripspeed's unique formula can be applied at any angle with sliding off.
NO AIRBORNE PARTICLES
With no grinding required, there will be no airborne particles, making Propspeed removal harmless.
HOW MUCH DO I NEED?
- 1x Large Kit = 2L Stripspeed
- 1x Medium Kit = 1L Stripspeed
- 1x Small Kit = 0.5L Stripspeed
SUITABLE FOR USE ON:
All metal surfaces where Propspeed, or similar running gear coatings, have been applied.
DO NOT USE ON:
- Transducers - Foulfree
- Underwater lights - Lightspeed
- Hull - Powdercoat